# Indoor temp sensor on hub

**URL:** <https://community.tempest.earth/t/indoor-temp-sensor-on-hub/11438>\
**Category:** Feature Requests\
**Created:** [December 30, 2020, 9:17pm UTC](https://community.tempest.earth/t/indoor-temp-sensor-on-hub/11438 "2020-12-30T21:17:58Z")\
**Posts on this page:** 6\
**Page:** 1

<div class="post-metadata">

**Author:** ![bentu](https://avatars.discourse-cdn.com/v4/letter/b/e480ec/32.png) [@bentu](https://community.tempest.earth/u/bentu)\
**Post date:** [December 30, 2020, 9:17pm UTC](https://community.tempest.earth/t/indoor-temp-sensor-on-hub/11438/1 "2020-12-30T21:17:58Z")

</div>

I would like indoor temp readings…  
Would it be possible to add indoor sensor to the hub?

---

<div class="post-metadata">

**Author:** ![jim.wn1x](https://sea2.discourse-cdn.com/flex020/user_avatar/community.tempest.earth/jim.wn1x/32/1014_2.png) [@jim.wn1x](https://community.tempest.earth/u/jim.wn1x)\
**Post date:** [December 30, 2020, 10:33pm UTC](https://community.tempest.earth/t/indoor-temp-sensor-on-hub/11438/2 "2020-12-30T22:33:28Z")

</div>

I use my old AIR to monitor my plant room.

---

<div class="post-metadata">

**Author:** ![rob.at.theshed](https://sea2.discourse-cdn.com/flex020/user_avatar/community.tempest.earth/rob.at.theshed/32/10670_2.png) [@rob.at.theshed](https://community.tempest.earth/u/rob.at.theshed)\
**Post date:** [December 30, 2020, 10:38pm UTC](https://community.tempest.earth/t/indoor-temp-sensor-on-hub/11438/3 "2020-12-30T22:38:03Z")

</div>

I was told the old AIR units will not work with the Tempest /Hub units sent down here to Australia.  
So We will have to wait for a new temperature sensor to be released.

---

<div class="post-metadata">

**Author:** ![jim.wn1x](https://sea2.discourse-cdn.com/flex020/user_avatar/community.tempest.earth/jim.wn1x/32/1014_2.png) [@jim.wn1x](https://community.tempest.earth/u/jim.wn1x)\
**Post date:** [December 31, 2020, 1:55am UTC](https://community.tempest.earth/t/indoor-temp-sensor-on-hub/11438/4 "2020-12-31T01:55:52Z")

</div>

That’s too bad…did they say why the AIR units cannot work in Australia with a new hub?

---

<div class="post-metadata">

**Author:** ![gizmoev](https://sea2.discourse-cdn.com/flex020/user_avatar/community.tempest.earth/gizmoev/32/941_2.png) [@gizmoev](https://community.tempest.earth/u/gizmoev)\
**Post date:** [December 31, 2020, 3:12am UTC](https://community.tempest.earth/t/indoor-temp-sensor-on-hub/11438/5 "2020-12-31T03:12:41Z")

</div>

There was some regulation change for the frequency allowed for the sensor to hub communication. I don’t recall which WF staff stated this, however.

---

<div class="post-metadata">

**Author:** ![rob.at.theshed](https://sea2.discourse-cdn.com/flex020/user_avatar/community.tempest.earth/rob.at.theshed/32/10670_2.png) [@rob.at.theshed](https://community.tempest.earth/u/rob.at.theshed)\
**Post date:** [December 31, 2020, 3:37am UTC](https://community.tempest.earth/t/indoor-temp-sensor-on-hub/11438/6 "2020-12-31T03:37:12Z")

</div>

It was to do with the Radio Frequency allocations I believe.  
I Ordered the Tempest back in April & was told to wait until I got it before ordering the Air.  
Due to all the “Interesting Stuff” happening this year, I received the Tempest in December…then found the Air to suit it is not available.  
I really want indoor/Outdoor temperature - like I had with my old 1-Wire station…!!  
But - I guess 2021 is another year 😀