# Purple Air AQI Display How To

**URL:** https://community.tempest.earth/t/purple-air-aqi-display-how-to/28301
**Category:** WeatherFlow PiConsole
**Created:** [September 5, 2026, 2:34pm UTC](https://community.tempest.earth/t/purple-air-aqi-display-how-to/28301 "2026-09-05T14:34:53Z")
**Posts on this page:** 1
**Page:** 1

<div class="post-metadata">

### Author: ![propgrinder](https://avatars.discourse-cdn.com/v4/letter/p/d6d6ee/32.png) [@propgrinder](https://community.tempest.earth/u/propgrinder)
#### Post date: [September 5, 2026, 2:34pm UTC](https://community.tempest.earth/t/purple-air-aqi-display-how-to/28301/1 "2026-09-05T14:34:53Z")

</div>

How to display Purple Air AQI:

With help from Peter and vinceskahan, I implemented a AQI display panel using a Purple Air sensor. Attached are the files I use. The AQI is labeled Example in the .ini file. Remove the .txt extension from the two files before use. Change the URL to that of your Purple Air sensor.

[customPanels.py.txt](https://community.tempest.earth/uploads/short-url/nmaKZYwxfhJZkAF559Fxwxd3b4f.txt) (1.1 KB)

[customPanels.kv.txt](https://community.tempest.earth/uploads/short-url/2FnOfgCVIDJs07tbfuRzIogEfkd.txt) (604 Bytes)

| [PrimaryPanels]  
PanelOne = Temperature  
PanelTwo = WindSpeed  
PanelThree = Barometer  
PanelFour = Rainfall  
PanelFive = SunriseSunset  
PanelSix = Example |
| --- |