# Wfpiconsole warnings

**URL:** https://community.tempest.earth/t/wfpiconsole-warnings/27924
**Category:** WeatherFlow PiConsole
**Created:** [November 10, 2025, 3:56pm UTC](https://community.tempest.earth/t/wfpiconsole-warnings/27924 "2025-11-10T15:56:24Z")
**Posts on this page:** 20
**Page:** 1

<div class="post-metadata">

### Author: ![user293](https://sea2.discourse-cdn.com/flex020/user_avatar/community.tempest.earth/user293/32/13484_2.png) [@user293](https://community.tempest.earth/u/user293)
#### Post date: [November 10, 2025, 3:56pm UTC](https://community.tempest.earth/t/wfpiconsole-warnings/27924/1 "2025-11-10T15:56:24Z")

</div>

Hi…I did a search in the forum, but did not come up with a clear solution. I keep getting warnings about no data in the 3 and 24 hour windows. I am running python 3.1 off of a win11 laptop. I have unloaded and reloaded the piconsole sw and I am still receiving those warnings. Another odd thing I was seeing 103.5 degrees in the trend area of the temp block. Everything else seems correct. The temps are now where they should be in the 40s. I have rebooted the piconsole as well as the hub. So far i am stumped after trying all of the prerequisite resets. Any ideas will be appreciated. Thank you

---

<div class="post-metadata">

### Author: ![peter](https://sea2.discourse-cdn.com/flex020/user_avatar/community.tempest.earth/peter/32/1365_2.png) [@peter](https://community.tempest.earth/u/peter)
#### Post date: [November 11, 2025, 12:24pm UTC](https://community.tempest.earth/t/wfpiconsole-warnings/27924/2 "2025-11-11T12:24:53Z")

</div>

These warnings happen when the PiConsole cannot fetch data from the API for the period of interest (3 hours, 24 hours etc.). Assuming there is no API issue, it is usually because data is not being reported by your station. Please can you confirm your station ID?

---

<div class="post-metadata">

### Author: ![user293](https://sea2.discourse-cdn.com/flex020/user_avatar/community.tempest.earth/user293/32/13484_2.png) [@user293](https://community.tempest.earth/u/user293)
#### Post date: [November 11, 2025, 1:42pm UTC](https://community.tempest.earth/t/wfpiconsole-warnings/27924/3 "2025-11-11T13:42:52Z")

</div>

Hi Peter. Thank you for your reply. My station ID is 65599. When I woke up this morning my station was off line. I rebooted my router and the station hub and all is back on line. I checked the sensor status and had all green lights. Last week I enabled sudo, but then I read that it could be a security risk for my laptop. I then disabled it. So, I don’t know if I corrupted anything in the process. Right now I am at a loss for a solution. Maybe my station is ready to bite the dust​:grimacing:😬😬Any help will be appreciated.

---

<div class="post-metadata">

### Author: ![peter](https://sea2.discourse-cdn.com/flex020/user_avatar/community.tempest.earth/peter/32/1365_2.png) [@peter](https://community.tempest.earth/u/peter)
#### Post date: [November 11, 2025, 9:52pm UTC](https://community.tempest.earth/t/wfpiconsole-warnings/27924/4 "2025-11-11T21:52:51Z")

</div>

This isn’t really an issue with the console. Looking at your station there are large gaps with no data, and the console is just reporting an error when it requests data from those gaps. Once the console stops requesting data from those gaps, the errors will go away. It’s possible your station might be about to bite the dust, but sometimes it is just random glitches

---

<div class="post-metadata">

### Author: ![user293](https://sea2.discourse-cdn.com/flex020/user_avatar/community.tempest.earth/user293/32/13484_2.png) [@user293](https://community.tempest.earth/u/user293)
#### Post date: [November 11, 2025, 9:55pm UTC](https://community.tempest.earth/t/wfpiconsole-warnings/27924/5 "2025-11-11T21:55:50Z")

</div>

Thank you Peter. Im going to reach out to customer service to see if they can run diagnostics on it.

---

<div class="post-metadata">

### Author: ![user293](https://sea2.discourse-cdn.com/flex020/user_avatar/community.tempest.earth/user293/32/13484_2.png) [@user293](https://community.tempest.earth/u/user293)
#### Post date: [November 12, 2025, 2:23pm UTC](https://community.tempest.earth/t/wfpiconsole-warnings/27924/6 "2025-11-12T14:23:40Z")

</div>

Hi Peter,

I figured out the problem. The power supply to the Tempest hub went bad. I noticed the green light was flickering and going to red. So I tried another power supply and everything is back on line. I’ll keep an eye on things to make there are no more warnings.

---

<div class="post-metadata">

### Author: ![user293](https://sea2.discourse-cdn.com/flex020/user_avatar/community.tempest.earth/user293/32/13484_2.png) [@user293](https://community.tempest.earth/u/user293)
#### Post date: [November 12, 2025, 5:48pm UTC](https://community.tempest.earth/t/wfpiconsole-warnings/27924/7 "2025-11-12T17:48:03Z")

</div>

Well, that was part of the problem. I’m still receiving the warnings. Customer service hasn’t contacted me as of yet. I’ll have to sit tight for now.

---

<div class="post-metadata">

### Author: ![peter](https://sea2.discourse-cdn.com/flex020/user_avatar/community.tempest.earth/peter/32/1365_2.png) [@peter](https://community.tempest.earth/u/peter)
#### Post date: [November 12, 2025, 7:53pm UTC](https://community.tempest.earth/t/wfpiconsole-warnings/27924/8 "2025-11-12T19:53:34Z")

</div>

Remember that these warnings are because there are past gaps in your data stream within the last 24 hours. For example, your station reported no data between 11/12/2025 2:25 AM and 11/12/2025 9:15 AM. If you are still getting these warnings after 24 hours with no significant data gaps, I will take another look

---

<div class="post-metadata">

### Author: ![user293](https://sea2.discourse-cdn.com/flex020/user_avatar/community.tempest.earth/user293/32/13484_2.png) [@user293](https://community.tempest.earth/u/user293)
#### Post date: [November 12, 2025, 8:21pm UTC](https://community.tempest.earth/t/wfpiconsole-warnings/27924/9 "2025-11-12T20:21:16Z")

</div>

Thank you Peter. I will keep an eye on it. I really appreciate your assistance on this.

---

<div class="post-metadata">

### Author: ![user293](https://sea2.discourse-cdn.com/flex020/user_avatar/community.tempest.earth/user293/32/13484_2.png) [@user293](https://community.tempest.earth/u/user293)
#### Post date: [November 13, 2025, 4:24pm UTC](https://community.tempest.earth/t/wfpiconsole-warnings/27924/10 "2025-11-13T16:24:47Z")

</div>

Hi Peter, Well, Tempest customer service said my station 65599 is operating as it should. The hub is now working since I changed out the power supply. However, I am still getting the no data in the 24 hour window warnings. Maybe it would help to delete the console version I am running and reinstall it? Or the other issue could be the Script app I am running to report to Weather underground? I am at a loss now. Thank you for any additional support that you can provide.

---

<div class="post-metadata">

### Author: ![peter](https://sea2.discourse-cdn.com/flex020/user_avatar/community.tempest.earth/peter/32/1365_2.png) [@peter](https://community.tempest.earth/u/peter)
#### Post date: [November 13, 2025, 5:45pm UTC](https://community.tempest.earth/t/wfpiconsole-warnings/27924/11 "2025-11-13T17:45:42Z")

</div>

Ok, I’ll look into this a bit more. Please can you send me a PM with the contents of your `wfpiconsole.ini` file?

---

<div class="post-metadata">

### Author: ![user293](https://sea2.discourse-cdn.com/flex020/user_avatar/community.tempest.earth/user293/32/13484_2.png) [@user293](https://community.tempest.earth/u/user293)
#### Post date: [November 13, 2025, 6:23pm UTC](https://community.tempest.earth/t/wfpiconsole-warnings/27924/12 "2025-11-13T18:23:22Z")

</div>

I just sent over the file content to you. Thanks very much. 🙂

---

<div class="post-metadata">

### Author: ![peter](https://sea2.discourse-cdn.com/flex020/user_avatar/community.tempest.earth/peter/32/1365_2.png) [@peter](https://community.tempest.earth/u/peter)
#### Post date: [November 13, 2025, 8:11pm UTC](https://community.tempest.earth/t/wfpiconsole-warnings/27924/13 "2025-11-13T20:11:34Z")

</div>

OK, this is strange as I don’t get any warnings when I run your station. Can you check the timestamp of the warning. Is it recent or are they old warnings that are just left behind in the terminal?

 ![image](https://us1.discourse-cdn.com/flex020/uploads/sws/original/3X/4/e/4e95aca5b455c9a66252f6e1bcdd7a8d01a4cc9e.png)

---

<div class="post-metadata">

### Author: ![user293](https://sea2.discourse-cdn.com/flex020/user_avatar/community.tempest.earth/user293/32/13484_2.png) [@user293](https://community.tempest.earth/u/user293)
#### Post date: [November 13, 2025, 8:33pm UTC](https://community.tempest.earth/t/wfpiconsole-warnings/27924/14 "2025-11-13T20:33:00Z")

</div>

![data logger](https://us1.discourse-cdn.com/flex020/uploads/sws/original/3X/0/5/05fee0c4ee0e1ab84dfd55cbb0d84199d49af7c2.jpeg)These were from yesterday. Before I restarted the console this morning the last log was today at 9:40am EST. If I get anymore warnings, they most likes will begin after the 3 hour window that show up in Win powershell. This is making my head spin 🤣 customer service didn’t find and warnings either, but yet I’m still seeing warnings in the data logger…..I mean not yet, but I’ll let you know.

---

<div class="post-metadata">

### Author: ![peter](https://sea2.discourse-cdn.com/flex020/user_avatar/community.tempest.earth/peter/32/1365_2.png) [@peter](https://community.tempest.earth/u/peter)
#### Post date: [November 13, 2025, 9:40pm UTC](https://community.tempest.earth/t/wfpiconsole-warnings/27924/15 "2025-11-13T21:40:31Z")

</div>

Ok, If you’re not seeing any warnings now that’s good. The data coming from your station looks good and there are no data gaps in the last 24 hours. You shouldn’t start to see the warnings again unless gaps appear in the data from your station. If you do see a warning again, please share the contents of the `wfpiconsole.log` file before you stop or restart the console

---

<div class="post-metadata">

### Author: ![user293](https://sea2.discourse-cdn.com/flex020/user_avatar/community.tempest.earth/user293/32/13484_2.png) [@user293](https://community.tempest.earth/u/user293)
#### Post date: [November 13, 2025, 10:17pm UTC](https://community.tempest.earth/t/wfpiconsole-warnings/27924/16 "2025-11-13T22:17:22Z")

</div>

Sounds good. Cheers and thanks again. I’ll be buying a cup of coffee soon 🙂

---

<div class="post-metadata">

### Author: ![user293](https://sea2.discourse-cdn.com/flex020/user_avatar/community.tempest.earth/user293/32/13484_2.png) [@user293](https://community.tempest.earth/u/user293)
#### Post date: [November 14, 2025, 7:25pm UTC](https://community.tempest.earth/t/wfpiconsole-warnings/27924/17 "2025-11-14T19:25:21Z")

</div>

Hi Peter….It appears my Piconsole cleared out the warnings. I only have 1 that said the pin fail but it appears it reestablished the connection as you can see by the log data I copied below. Have a great weekend.

[WARNING] [Websocket] 2025-11-14 09:22:07 - Ping failed  
[INFO] [Websocket] 2025-11-14 09:22:07 - Closing connection  
[INFO] [Websocket] 2025-11-14 09:22:07 - Connection closed  
[INFO] [Websocket] 2025-11-14 09:22:17 - Opening connection  
[INFO] [Websocket] 2025-11-14 09:22:18 - Connection open

---

<div class="post-metadata">

### Author: ![user293](https://sea2.discourse-cdn.com/flex020/user_avatar/community.tempest.earth/user293/32/13484_2.png) [@user293](https://community.tempest.earth/u/user293)
#### Post date: [November 17, 2025, 1:39pm UTC](https://community.tempest.earth/t/wfpiconsole-warnings/27924/18 "2025-11-17T13:39:30Z")

</div>

Hi Peter …here we go again next ill send you the logs. If nothing can be done. I can live with the errors. I just might do a fresh install.

 ![20251117_082116](https://us1.discourse-cdn.com/flex020/uploads/sws/original/3X/9/2/927d8f9a79a3bbb0c18670e435ffece9f7c70198.jpeg)

---

<div class="post-metadata">

### Author: ![user293](https://sea2.discourse-cdn.com/flex020/user_avatar/community.tempest.earth/user293/32/13484_2.png) [@user293](https://community.tempest.earth/u/user293)
#### Post date: [November 17, 2025, 1:41pm UTC](https://community.tempest.earth/t/wfpiconsole-warnings/27924/19 "2025-11-17T13:41:15Z")

</div>

[Keys]  
WeatherFlow = 73e3a7af-e941-4ebf-b46d-541ed18d03c9  
CheckWX = ee88bb2507d24139bb8fd61610

[Station]  
StationID = 65599  
TempestID = 178845  
TempestSN = ST-00155961  
SkyID =  
SkySN =  
OutAirID =  
OutAirSN =  
InAirID =  
InAirSN =  
TempestHeight = 8.53440010547638  
SkyHeight =  
OutAirHeight =  
Latitude = 41.51522  
Longitude = -73.57993  
Elevation = 250.7707061767578  
Timezone = America/New\_York  
Name = Zero North 40 007

[Units]  
Temp = f  
Pressure = inhg  
Wind = mph  
Direction = cardinal  
Precip = in  
Distance = mi  
Other = imperial

[Display]  
TimeFormat = 12 hr  
DateFormat = Mon, 01 Jan 0000  
UpdateNotification = 1  
PanelCount = 6  
LightningPanel = 1  
lightning\_timeout = 0  
IndoorTemp = 0  
Cursor = 1  
Border = 1  
Fullscreen = 1  
Width = 800  
Height = 480

[FeelsLike]  
ExtremelyCold = 15  
FreezingCold = 28  
VeryCold = 32  
Cold = 45  
Mild = 59  
Warm = 68  
Hot = 80  
VeryHot = 86

[PrimaryPanels]  
PanelOne = Forecast  
PanelTwo = Temperature  
PanelThree = WindSpeed  
PanelFour = SunriseSunset  
PanelFive = Rainfall  
PanelSix = Barometer

[SecondaryPanels]  
PanelOne = Sager  
PanelTwo = Forecast  
PanelThree =  
PanelFour = MoonPhase  
PanelFive =  
PanelSix = Lightning

[System]  
Connection = Websocket  
rest\_api = 1  
stats\_endpoint = 0  
SagerInterval = 2  
Timeout = 20  
Hardware = Other  
Version = v25.9.2

---

<div class="post-metadata">

### Author: ![peter](https://sea2.discourse-cdn.com/flex020/user_avatar/community.tempest.earth/peter/32/1365_2.png) [@peter](https://community.tempest.earth/u/peter)
#### Post date: [November 17, 2025, 1:58pm UTC](https://community.tempest.earth/t/wfpiconsole-warnings/27924/20 "2025-11-17T13:58:46Z")

</div>

I’ve just checked your station again and there was a 10 minute gap in your data between 3:25 and 3:35 AM, which explains the warnings you see in the terminal. You are also seeing a lot ping errors - these happen when the console is unable to reach the WF servers. You might want to check your internet connection. It would explain the missing gaps in your data and all the ping errors being thrown by the console

 ![image](https://us1.discourse-cdn.com/flex020/uploads/sws/original/3X/e/6/e646a5c930fc5851da0cd7a59f130741c3c29fc8.png)

[Next page](https://community.tempest.earth/t/wfpiconsole-warnings/27924.md?page=2)
