Cool - my udp listener syslogged the unexpected messages and their content… Sep 19 12:29:42 zero listen.py: [wf-udp-listener]: starting to process messages Sep 21 03:00:49 zero listen.py: [wf-udp-listener]: unknown data type in {"serial_number": "HB-00010412", "type": "calibration", "value": "Air C…

It’s just a signal that your Hub received a calibration and it is operating within normal parameters. It is meaningless to anyone outside of WeatherFlow.

Still seeing nightly events like this, just after midnight local time. Can somebody from @WFmarketing explain what Air calibrations you’re sending nightly ? Or are these just dry-runs exercising your system to get ready for whenever you do the Sky calibrations for real ?

Hi @vinceskahan Every day our Continuous Learning (CL) system is comparing your station data against more than a dozen other observations within a couple kms of your location. Right now the CL system is enabled for temp and humidity. If the comparison values meet an R-squared QC threshold, a nightl…

Interesting stuff - thanks ! FWIW, my WF temp+humidity are basically exactly on the money vs. my VP2 that sits 20 feet from it, as long as the VP2 isn’t in bright sun. The VP2 seems to read a couple degF high when in the sun, perhaps the shield is losing its effectiveness after almost 10 years up. …

Interesting … as my Air is in my Living Room reading 20C when outside air temp is 3C, is that going to start causing you (or I) problems with totally bogus readings?? I was gonna move the Air outside after I set it up, but never got around to it, and right now its more interesting monitoring my indo…

There’s a setting checkbox for indoors, which I assume prevents this from happening…

So there is … and it was already on Indoor - I must have set it ages ago and forgot! All good, nothing to see, move along!! Thanks @vreihen :slight_smile:

[image] dave: as my Air is in my Living Room reading 20C when outside air temp is 3C, is that going to start causing you (or I) problems with totally bogus readings?? Hi @dave . Good question. As @vreihen mentioned, the ‘indoor’ designation flags the data and disqualifies it as valid outdoor…

Thanks for the info @WFmarketing :+1:

Air calibration received messages detected (CL system)

Developers

GaryFunk July 29, 2020, 2:53am 12

This is what you are looking for and thus topic.

Topic		Replies	Views
Continuous Learning - which variables? Tempest Owners	26	2309	December 19, 2018
Calibration questions Tempest Owners calibration , tempest	41	2984	June 10, 2021
Visibility into & Control of Continuous Learning Processes Feature Requests continuous-learning	42	2041	June 3, 2023
Indication of CL / calibration activity Feature Requests	11	840	September 16, 2020
Configuration Changes and Calibration data packet Feature Requests udp , firmware	11	1009	August 11, 2020

Air calibration received messages detected (CL system)

Related topics